Desalination Treatment Chemicals

Used for anti-scalant to protect the membrane of reverse osmosis to achieve the best of recovery and less requirement for cleaning. AQUARIGHT ZF-100 has ability as an anti foulant specifically formulated to prevent both inorganic and organic fouling event good for the raw water which is containing high hardness and silicate. 

Used for anti-fouling to protecting the membrane of reverse osmosis to aiming for the best recovery and reducing significantly the requirement for cleaning. AQUARIGHT ZF-260 has been formulated specifically to preventing inorganic scale and fouling due to the high of metal content and organic matters in the raw water. 

Used for anti-kerak (anti scalant) for ‘thermal desalination plant’ to keep stable the best recovery and reducing significantly the requirement for cleaning. AQUARIGHT ZV-A specifically formulated to preventing inorganic scale  due to the high of hardnes and silica content in the raw water to achieve the best performance and assuring to get the most purity of the product/permeate water.

Is an anti foaming used for thermal desalination excellency to prevent ‘carry over’ in order to get the best purity of the product water. By using AQUARIGHT ZV-M8 product recovery of thermal desalination become optimize and purely and to minimize the problems on to your plants.

Used for as an antiscalant for thermal desalination, also very best used to preventing scale for ‘boilers medium to high pressure’. AQUARIGHT DP3117 is a unique combine of ‘polymeric dispersant’  which is in neutralised pH thus will not affect the pH within the whole system, and this kind of product is environment friendly and easy to handle.

Is a low pH membrane cleaning, used to remove any deposits of inorganic, minerals, silicate from the membrane surface in order to recover the % permeate of reverse osmosis thus it can be maintained at the best of performance. Normally this product is combined to use with a high pH cleaner AQUARIGHT MBC-11.

Is a high pH membrane cleaning, used to remove any deposits of organic matters, biofouling and slime from the surface of membranes in keeping the very best of recovery of reverse osmosis. Normally, this product used by the combination with low pH cleaner AQUARIGHT MBC-3.

Used as a chemical pre-treatment for RO Plant for enhancing the filtration rate prior to the membrane module. Thus the fouling potential can be avoided then kept the membrane of reverse osmosis more longer lifetime. AQUARIGHT FC-703 normally injected prior to the pre-filter (Sand or Multi Media Filter).

Used for desinfectantion to kill all of microorganisms in the raw water. Normally injected prior to the pre-treatment to preventing the growth of biofouling onto the membrane of reverse osmosis, and also can be used at post-treatment to sanitize the product water to avoid rebuild the growth of microorganism and any pathogenic strains. When used for  reverse osmosis this product must be combined with sodium bisulphite in order to adsorb the residual of chlorine to avoid the membrane leaking due to the excess chlorine can damage the ‘thin film’ polyamide of the membranes.

Used to neultralise chlorine (neutralizer) injected at the downstream of sodium hypochlorite or chlorine (Cl2), this product willl avoids the clorine pass to the membrane module means will avoiding the early damage of reverse osmosis 

The chemical potable water treatment, normally used for post treatment or final treatment to prevent corrosion of piping system (water distribution pipework) whereas the product water is extreemely pure very poor in minerals content as a result of reverse osmosis. AQUARIGHT P07WT is also very good used for domestic water/potable water where the product has a flocculating ability to improve the clearity of water.

Is a mineral such food grade of CaCO3, normally used to refill mineral in water. By using the product we can set up the mineral contain in the water to meet the drinkig water standard according to the heatlh standard for human.